Frequently Asked Questions - Installation

We offer three different types of glue with different properties to ensure optimal and durable installation in all cases. Here are the main properties of the three types of glue: ADEFIX® P5: glue/coating suitable for polystyrene and polyurethane products. Used for fixing products from the ARSTYL®, WALLSTYL® and NOMASTYL® ranges. A solvent-free glue that can be sanded and painted. This glue for interior use is correctable up to 10 minutes after application and takes 6 to 8 hours to dry completely. ADEFIX® PLUS: vertical joint adhesive (3 mm) for large WALLSTYL® and ARSTYL® products from 8 cm height/span, for bonding WALLSTYL® and ARSTYL® profiles to non-absorbent substrates, flexible profiles, skirtings in damp rooms, single-sided installation (indirect light), for skirtings as well as for wall panels DOMOSTYL® HYBRID: glue for outdoor use for DOMOSTYL® products. This glue can be painted and can be corrected up to 4 minutes after application. Its drying time is approximately 2mm/24h. Please always refer to the installation instructions in the "documents" section and then "installation manual" or under the link https://noel-marquet.be/en/documents/

ADEFIX® PLUS is suitable for laying on tiles, which is why we recommend it for the installation of our skirtings.

An electric circular saw is suitable for cutting all our decorative elements. If you want to cut the profiles manually, the type of saw you use depends on the material of the product you want to cut. When cutting NOMASTYL® (PS) products, we recommend using a back saw with finer teeth. Our accessories include the PS Saw, which is designed for cutting these profiles. For the cutting of ARTSYL® and WALLSTYL® products (PU, HDPS), we recommend the use of a sabre saw with a more pronounced toothing. Our accessories include the HDPS/PU saw, which is suitable for these profiles.

Absolutely! You can find our installation instructions on our website in the "documents" section and then "installation manual" or under the link https://noel-marquet.be/en/documents/

We offer various adhesives that are suitable for mounting the products as well as for making the joints. Apply the glue to the back of the profile and to the cut and make sure that there is a 3mm gap between the mitres when fitting. Remove the excess glue and flatten the joint with a spatula. Allow to dry (min. 6 hours), then lightly sand the joints with sanding paper (150 grain or finer). Then touch up the ceiling and wall joints and mitre joints with the adhesive. Joints between ARSTYL® WALL PANEL and TILES do not need to be glued or plastered, but the wall and ceiling joints should be joined with ADEFIX® adhesive. For LIQUID and WAVE models, it is recommended to use tile spacers (1-2mm) to ensure an even distance between the panels. For other models, spacers are not necessary. Use our calculator to find out what type of adhesive to use: https://noel-marquet.be/en/glue-consumption/

To ensure successful installation, surfaces must be clean, dry, dust-free, degreased and smooth (roughen if necessary). Installation on damp substrates, under forced drying conditions or at very high temperatures should be avoided. Please refer to the installation instructions (https://noel-marquet.be/en/documents/).

ADEFIX® P5: Before drying: with water - After drying: mechanically ADEFIX® PLUS: Before drying: with turpentine - After drying: mechanically DOMOSTYL® HYBRID: Before drying: with turpentine - After drying: mechanically